FUEL TREATMENT
SUPERKOTE 2000
FUEL TREATMENT
Clean motors operate with more efficiency
All motors suffer from a sludge accumulation, varnis- hes and carbons. This sediments block the fuel ducts, leaving deposits in the carburetors, obstructing the injectors, leading to a stick of them in the rings.
SUPERKOTE 2000 fuel treatment (SK-FT) contain complex organic solvents that dissolve the sludge’s, rubbers or varnishes, as well it avoids the reformation of this deposits. Using SK-FT regularly:
-
Clean the motor to facilitate the launching. More energy and acceleration.
-
Reducing to a 25% the fuel consumption, since it cleans the injectors and the carburetors.
-
Dissolves the deposits in the tip of the injections to restore the spraying pattern.
-
It avoids the obstruction in the fuel lines.
SUPERKOTE 2000 FUEL TREATMENT
Cleaning and protecting treatment for fuel system (Diesel and Gasoline), Cleans the fuel system while driving, removes and dissolves deposits of stickiness and resin, lubricates cylinders and prolongs motor usefulness. Eliminates the water and humidity. ,extracts dirt and impurities that is found at the bottom the tank.
FUEL TREATMENT FEATURES
Performance Boost:
Minor or minimum idling.
Power increase and better acceleration.
Improves the general efficiency of the motor to
obtain a fuel saving kilometers/ gal.
SK-FT contains organic lubricants that cover the fuel system components to avoid corrosion and oxidation of the metallic compounds and it burns in a full clean way without leaving ashes deposits that dirty the rings, valves, or plugs.
Phase Separation Reduction:
This is possible when you use SK-FT, periodically to keep the water away from the E-10 fuel, since it will be burn in the combustion at the moment of been neutralize the water.
The fuels often used contain water as a contaminant. SK-FT contain stabilizers that keep the fuel fresh, cleaners to dissolve the rubbers and varnishes, and compounds that consu- me the organics, to be encapsulated.
Protection:
The water contamination is known as “E-10 fuel sepa- ration”.
The SK-FT formula will have a strong hydrophilic attraction with water. SK-FT search for water droplets and permanently sticks them to itself to convert them into molecules, which will be totally encapsulated with an organic fuel compound. The water will be removed with the vehicle in movement and this one will consume and burn these capsules.
Versatility:
Avoid the phase ́s separation in the E-10 fuel.
Eliminate the freezing so the fuel conducts and
filters are not blocked.
Avoid the formation of paraffin’s during winter.
Prevent corrosion and acid formations.
Avoid the clogging of the injectors half-pints.
Reduce the black smoke and the emissions.
Eliminate the necessary conditions for the growth of microbes.
Improves the general efficiency of the motor to
obtain a fuel saving kilometers/ gal.
USES
HOW TO USE
For initial treatment, add 2oz of SUPERKOTE Fuel Treatment per 10 gallons of fuel. Continue using 1oz of SUPERKOTE Fuel Treatment per every 10 gallons. In below zero temperatures, always use 2oz per 10 gallons until treatment is completed.
DIRECTIONS
Pour the contents into the gas tank.
BEFORE
Shake well before use, can be added any time.
SIZES AND PRESENTATIONS
FUEL TREATMENT